Cavium FastLinQ QL41262HLCU - Network adapter - PCIe 3.0 x8 low profile - 25 Gigabit SFP28 x 2 - for PRIMERGY RX2520 M5, RX2530 M4, RX2530 M5, RX2540 M5, RX4770 M4, TX1320 M4, TX2550 M5 More information: General | Form Factor | Plug-in card - low profile | | Device Type | Network adapter | | Interface (Bus) Type | PCI Express 3.0 x8 | | PCI Specification Revision | PCI 3.0 | Expansion / Connectivity | Interfaces | 2 x 25Gb Ethernet - SFP28 | Networking | Features | IPv6 support, firmware upgradable, QoS, Jumbo Frames support, RDMA support, IPv4 support, PXE support, LSO, GSO, LRO, RSS, UEFI support, SR-IOV, NPAR, TSO, MSI-X, TSS, RoCE, VXLAN, NVGRE, RoCE v2, RSC, OpenStack compatible, iWARP support, DPDK, iSCSI Extensions over RDMA (iSER) | | Connectivity Technology | Wired | | Data Link Protocol | 25 Gigabit Ethernet | | Network / Transport Protocol | TCP/IP, UDP/IP | | Compliant Standards | IEEE 802.1Q, IEEE 802.3ad (LACP), IEEE 802.1as, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.3by, IEEE 802.3-2015 | | Data Transfer Rate | 25 Gbps | | Ports | 25 Gigabit SFP28 x 2 | Miscellaneous | Compliant Standards | TUV, EN 61000-3-2, EN 61000-3-3, EN55024, CB, ICES-003 Class A, CSA C22.2, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, BSMI CNS 13438, KC, AS/NZS, VCCI Class A, FCC CFR47 Part 15 A, EN 55032 | | Included Accessories | Low-profile bracket, full-height bracket | Software / System Requirements | OS Required | Linux, Microsoft Windows | Environmental Parameters | Min Operating Temperature | 0 °C | | Max Operating Temperature | 55 °C | | Humidity Range Operating | 10 - 80% | Compatibility Information | Designed For | Fujitsu PRIMERGY RX1330 M4, RX2520 M4, RX2520 M5, RX2530 M4, RX2530 M4 Liquid Cooling, RX2530 M5, RX2530 M5 Liquid Cooling, RX2540 M4, RX2540 M5, RX4770 M4, RX4770 M4 liquid cooling, RX4770 M4 Performance, TX1320 M4, TX1330 M4, TX2550 M4, TX2550 M5 |
|