Cisco 881 Ethernet Security - Router - 4-port switch - refurbished

General

Features

NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), traffic shaping, Stateful Packet Inspection (SPI), content filtering, MAC address filtering, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy

Connectivity Technology

Wired

Data Link Protocol

Ethernet, Fast Ethernet

Network / Transport Protocol

L2TP, IPSec

Compliant Standards

IEEE 802.1D, IEEE 802.1Q, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1

Device Type

Router - 4-port switch (integrated)

Enclosure Type

Desktop

Status Indicators

Port status, power

Remote Management Protocol

Telnet, SNMP 3, HTTP, HTTPS, SSH

RAM

256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin

Capacity

IPSec VPN tunnels: 20

Flash Memory

128 MB

Encryption Algorithm

DES, Triple DES, PKI, 128-bit AES, 192-bit AES, 256-bit AES

Routing Protocol

RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)

Authentication Method

RADIUS, TACACS+

Expansion / Connectivity

Interfaces

LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX - RJ-45 ¦ USB: 1 x 4 pin USB Type A

Expansion Slots

1 (total) / 1 (free) x SO-DIMM 200-pin

Manufacturer Warranty

Service & Support

Limited warranty - 1 year

Miscellaneous

Pricing Type

Refurbished

Power

Power Device

External power adapter - 60 Watt

Voltage Required

AC 120/230 V (50/60 Hz)

Software / System Requirements

OS Provided

Cisco IOS Advanced Security

Environmental Parameters

Min Operating Temperature

0 °C

Max Operating Temperature

40 °C

Humidity Range Operating

10 - 85% (non-condensing)

Dimensions & Weight

Width

32.5 cm

Depth

24.9 cm

Height

4.4 cm