HPE ProLiant DL385 Gen10 - Server - rack-mountable - 2U - 2-way - no CPU - RAM 0 GB - SATA - hot-swap 3.5" bay(s) - no HDD - GigE - monitor: none - CTO
General | Type | Server |
| Localisation | Region: Worldwide |
| Built-in Devices | Led panel |
| Product Form Factor | Rack-mountable - 2U |
| Hot-Swap Bays Qty | 12 |
| Server Scalability | 2-way |
Expansion / Connectivity | Interfaces | 1 x HPE iLO - Type A (1 in front) ¦ 5 x USB 3.0 (1 front, 2 rear, 2 internal) ¦ 4 x LAN (Gigabit Ethernet) - RJ-45 (4 rear) ¦ 1 x HPE iLO - RJ-45 (1 rear) ¦ 1 x VGA (1 rear) |
| Slots | 1 (total) / 0 (free) x FlexibleLOM ¦ 1 (total) / 1 (free) x PCIe 3.0 x16 - half-length, full-height ¦ 2 (total) / 2 (free) x PCIe 3.0 x8 - half-length, full-height ¦ 1 (total) / 1 (free) x microSD Card (internal) |
| Bays | 1 (total) / 1 (free) x external ¦ 12 (total) / 12 (free) x hot-swap 3.5" LFF |
Manufacturer Warranty | Service & Support | Limited warranty - parts and labour - 3 years - on-site - response time: next business day |
RAM | Technology | DDR4 SDRAM - ECC |
| Form Factor | DIMM 288-pin |
| Features | Registered, Load-Reduced DIMM (LRDIMM), HPE SmartMemory |
| Installed Size | 0 GB / 4 TB (max) |
| RAM Supported | 1 TB registered - ECC ¦ 4 TB Load-Reduced - ECC |
| Slots | 32 (Total) / 32 (empty) |
| Rated Memory Speed | 2666 MHz |
Networking | Features | Wake on LAN (WoL), ACPI support, PXE support |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1as, IEEE 802.3az |
| Remote Management Protocol | SNMP 3, IPMI 2.0, SMASH CLP |
| Interface (Bus) Type | PCI Express 2.0 x4 |
| Ethernet Ports | 4 x Gigabit Ethernet |
| Remote Management Controller | Integrated Lights-Out 5 |
| Ethernet Controller | HPE 331i |
Miscellaneous | Compliant Standards | AES, FIPS 140-2, IPv6 Ready, TLS v1.2, ASHRAE Class A4, ASHRAE Class A3, WEEE 2002/95/EC, ACPI 6.1 |
| Pricing Type | CTO |
| Included Accessories | 6 hot plug high performance fans |
Power | Voltage Required | AC 120/230 V (50/60 Hz) |
| Device Type | Power supply - hot-plug |
| Installed Qty | 0 |
| Max Supported Qty | 2 |
| Power Redundancy | Optional |
| Power Redundancy Scheme | 1+1 (with optional power supply) |
Environmental Parameters | Min Operating Temperature | 10 °C |
| Max Operating Temperature | 35 °C |
| Humidity Range Operating | 8 - 90% (non-condensing) |
Storage Controller | Type | 1 x RAID - PCIe 3.0 x4 |
| Controller Interface Type | SATA 6Gb/s |
| Channel Qty | 14 |
| RAID Level | RAID 0, RAID 1, RAID 5, RAID 10 |
| Storage Controller Name | HPE Smart Array S100i SR Software RAID |
Optical Storage | Type | No optical drive |
Operating System / Software | Software | HPE iLO Standard with Intelligent Provisioning |
Monitor | Monitor Type | None. |
Graphics Controller | Video Memory | 16 MB |
| Video Interfaces | VGA |
Hard Drive | Type | No HDD |
Dimensions & Weight | Width | 44.55 cm |
| Depth | 73.02 cm |
| Height | 8.73 cm |
| Weight | 14.9 kg |
Card Reader | Type | Card reader |
| Supported Flash Memory Cards | microSD |
Environmental Standards | ENERGY STAR Version | 2.1 |
| ENERGY STAR Certified | Yes |
Processor / Chipset | CPU | No CPU |
| Max CPU Qty | 2 |
| CPU Upgradability | Upgradable |
| CPU Socket | Socket SP3 |