The Makita HR4001C SDS Max Rotary Hammer has been developed to surpass competitions in vibration level, operation efficiency and cost-effectiveness. It is equally at home drilling large holes, up to 40mm with a solid drill bit, 105mm with a TCT core bit or fitted with a point or chisel for removing render from the outside of a building or breaking up shallow concrete floors. Packed full of features including 2 lights that are situated on the barrel, one to advise you of power to the motor and a second light to warn you that machine requires a service. The tool is double insulated for increased user safety.
Features
Soft start
Low vibration enables prolonged use
Torque limiter: the drill stops when the bit hits against reinforcements
Electronic-power-control for greater comfort
Dual operation mode: rotary hammer and hammer only
Constant speed under load
Double insulation
Specification
Voltage: 110V
Impact energy: 6.8 J
Max in concrete: 40 mm
Max core diameter (TCT): 105 mm
Blows per minute: 1350-2750 bpm
Input wattage: 1100 w
VIBRATIONS
Vibration K factor: 2.5 m/sec²
No Load Speed: 235 - 480 rpm
Vibration when chiselling: 10.5 m/sec²
Vibration when hammer drilling: 12.5 m/sec²
Noise sound pressure: 92 dB(A)
Noise K factor: 3 dB(A)
Noise sound power: 103 dB(A)
Standard Equipment
1x Makita HR4001C 110V SDS Max Rotary Demolition Hammer Drill
1x 11 x 130mm Pilot Drill
1x 300mm SDS MAX Adaptor
1x 25mm x 520mm SDS MAX Drill Bit
1x 19mm x 540mm SDS MAX Drill Bit
1x 14mm x 540mm SDS MAX Drill Bit
1x 10mm x 540mm SDS MAX Drill Bit
1x 26mm x 520mm SDS MAX Drill Bit
1x 30mm x 570mm SDS MAX Drill Bit
1x 18mm x 540mm SDS MAX Drill Bit
1x 35mm Heavy Duty Core Drill
1x 40mm Heavy Duty Core Drill
1x 45mm Heavy Duty Core Drill
1x 80mm Heavy Duty Core Drill
