GE 5 Girraffe
Features
Electronic: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
Very handy, light-weight machine with optimum ease of operation. Provides comfortable and ergonomic working conditions
Easy guiding: by optimal balance between motor and sanding head
Reliable force transmission and high flexibility thanks to the flexible drive shaft from. For decades established FLEX technology. Thanks to this design principle the weight on the head of the Giraffe is reduced to a minimum. This facilitates handling.
Gimbal-mounted sanding head provides high flexibility and optimum adjustment for sanding walls and ceilings.
Effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment
Option of connecting the FLEX safety vacuum cleaners to the FLEX clip-system on the guide tube
Easy handling thanks to ergonomically shaped guide tube made of aluminium. Optionally an auxiliary handle (accessory) can be attached
Dust-proof on/off switch
Very flexible thanks to an optional 500 mm extension (accessory) for high rooms, can be attached without any tools
According to the assortment of sanding paper ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting, polishing
Very large areas and rooms up to 3.20 m in height can be processed thanks to the optional application of the GM 320
The innovative, textile transport system allows the machine and accessories to be transported effortlessly. The Giraffe.® does not have to be mounted and is immediately ready for use
Specification
Power input. 500 watt
Power output. 270 watt
No load speed. 1100-1650 rpm
Sanding disc Ø. 225 mm
Tool fixture. velcro
Tilt angle on the head. 100 .°
Length. 1520 mm
Cable length. 5,0 m
Weight. 3,9 kg
VCE 33 M AC
Features
Adapter plate that can be installed without using tools, for fixing L-BOXXes and Tanos systainers on the head of the vacuum cleaner
The high-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result
Continuous automatic flat filter cleaning ensures no loss of suction
The flat-fold filter with Teflon coating / nanocoating allows optimum use of the tank volume
With permanent socket and electronic automatic on/off switch
Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of .‰¤ 20m/s
The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding
Suction diameter selector switch for adjusting the optimum flow rate
Suitable for wet vacuuming: with electronic liquid level control
Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun) empties any remaining dust in the vacuum hose
Double-walled sturdy container with integrated grip recess for emptying the container easily
Dust-protected antistatic finish prevents electric charging of the suction hose
Equipped with large wheels and two swivel guide rollers made of metal
Separate motor air cooling duct with coarse dirt filter. Protects the turbine against the ingress of ambient air and thereby extends the service life. (Fine dust filter PES available as an accessory)
Simple filter change without removing the suction head
With hose retainer and expander for easy, quick securing of the power cable
With 4 clamping loops (2 on each side ) for attaching straps and a giraffe holder
Recommendation: When working with a filter bag turn off the automatic cleaning system. When using a disposable bag leave the system on
Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m.³. Specifically for mineral and timber dusts (also beech and oak)
Specification
Power input P. max.. 1400 watt
Max. volume flow. 4500 l/min
Max. vacuum. 25000 Pa
Filter surface. 5000 cm.²
Container volume. 30 l
Liquid capacity. 17 l
Power take off. 100-2400 watt
Size ( W x L x H). 565 x 385 x 565 mm
Cable length. 7,5 m
Weight. 15,2 kg
Warranty
12 months
