DAC500 - Speaker - for PA system - white, RAL 9016

DAC500 has 24 loudspeakers (3045mm total length) and offers up to 94dB at 40m.\nDAC500 is a steerable line array system specially designed for high quality speech and background music applications in reverberant acoustic environments where it is difficult to meet contractual speech intelligibility requirements. Each array is equipped with remote control facilities and a dualmode redundant power supply. The system can be operated using a 24V battery backup and has fault contacts and line surveillance to comply with EN 544. An RS485 data bus is provided for status reporting and PC based remote setup (up to 32 DAC Series Line Arrays on the bus). Ethernet connectivity for remote access via WAN is also included.\nEach DAC500 array has a very tightly controlled beam which can be shaped as required for specific applications or environments requiring symmetrical or asymmetrical, single, dual or triple lobe designs. To meet future standards, DAC500 has been equipped with networking facilities. The input section has been designed to broadcast standards and now has two fully controllable audio inputs and outputs with override functions and hardware bypass function. The output to the slave unit carries either the preprocessed mixed signal of the input mix for easier room control. Integrated DSP control features 7band parametric EQ, noise gate, delay rooms, peak limiter, VOX control and contact control on the audio inputs and level raising microphone for ambient noise sensing. The adaptable acoustic center allows the acoustic center to be freely moved up and down the array to match lobe shape within the listening area. Lobe switching provides quick coverage change by applying a contact. This offers the possibility to integrate or exclude a certain section of the audience area by simply adding a second lobe.