Torque tester SENSOTORK® No.7707-1-2W 0,2-10 N·m

· Compact torque tester for easy adaptation by replacement of the transducers · high degree of accuracy thanks to flat transducer and conversion and digitalisation of readings within the transducer · high degree of safety through display showing actual torque read-off where clicking torque wrenches are used · Electronic torque tester for torque wrenches, consisting of: · transducer (patent) · holder · display unit (registered design) · tripod for display unit (with 1.5 m cable) · spiral cable · mains adaptor (110 V-230 V with interchangeable socket adaptors) or direct connection to 12 V in-car supply is possible · square drive adaptor (No 7707-2W, No 7707-2-1W, No 7707-2-2W, No 7707-3W) · kit for attaching the unit to a workbench or wall in a horizontal or vertical testing position · for clockwise and anticlockwise use · units of measurement: N·m, ft·lb, in·lb · the easily interchangeable transducers are attached to the holder by means of a QuickRelease safety lock · low lateral forces thanks to low-profile transducers · automatic detection of the transducer · flexible and user friendly because the unit can be used horizontally or vertically and the display unit can be placed in many positions · additional tripod with 1.5 m cable for mounting the display unit to facilitate visual monitoring when using longer torque wrenches · especially broad measuring range from approx. 2 % to 100 % of rated value · the software No 7759-4, including USB hub and jack cable , enables readings to be transferred to the PC for documenting (no separate power supply needed, power comes from PC) · while individual transducers are being recalibrated, the torque tester itself remains on-site for further use · wide range of application (-20°C to +60°C) · complies with DIN 51309: 2005, Class 2 and DKD-R 3-8: 2003 · with certificate · supplied in sturdy plastic box · QuickRelease Rapid change and firm locking of the transducers thanks to the QuickRelease safety lock. · Interchangeable square drive adapters: A set of interchangeable square drive adapters are conveniently stored in the mounting block for a range of different drive sizes.