MANOSKOP® tightening angle torque wrenches w.mount for insert tools No.714/ 1 1-10 N·m size of mount 9x12 mm

· 4 measuring modes (torque, angle, torque backed up by angle, angle backed up by torque) · high-definition colour display with additional side-mounted indicator lamps · freely configurable menu structure · optionally: Li-ion battery No 7195-2 and charger No 7160 · 3 function modes: cut-out, peak hold (indicating mode with peak value) and track (indicating mode with current value) · micro USB interface · bayonet connection for battery compartment · QuickRelease safety lock change system for insert tools · data storage (= 2500 tightening jobs) · as many as 200 joints can be programmed in up to 25 preset sequences · different tolerance limits can be set for each joint · acoustic and visual assessment of the joint · rapid, accurate setting via keypad · the automatic keypad lock prevents inadvertent changes · overload protection by means of acoustic and visual signals and a fail-safe system (clockwise) · automatic notification of the next calibration date, either by the number of joints or the time interval · fully automated calibrating and adjusting using the perfectControl® calibrating and adjusting unit No 7794-2 (torque) or 7794-3 (torque and angle) · units of measure: N·m, ft·lb, in·lb · tightening torque is automatically corrected if a deviating extension is entered · immediately reusable after release · clockwise and anticlockwise tightening - it may be necessary to refit the insert tool rotated through 180° for anticlockwise tightening in the cut-out mode · tactile and acoustic trigger signal · torque and angle are simultaneously visible · all readings are independent of the point of application of force (with sizes 1, 2 and 4) · safe handling due to ergonomically designed handle (resistant to oils, grease, fuels, brake fluid and skydrol) · 3 certificates (torque indicating/clicking in accordance with DIN EN ISO 6789-2:2017, angle) · in sturdy plastic box (size 40-100 in steel box) · design patent, patent · supplied with SENSOMASTER 4 software, USB cable, 4 AAA/LR03 micro-batteries, 1.5 V. AAA, 1.2 V, micro NiMH rechargeable batteries can be used · display resolution, angle 0.1° · display deviation value, angle ±1%, ±1 digit · display resolution, torque = 60 N·m: 0.01 N·m | > 60 N·m: 0.1 N·m · display deviation value, torque ±2%, ±1 digit