Raspberry Pi, Pi NoIR, Camera Module , CSI-2 with 3280 x 2464 pixels Resolution / 9132673

Raspberry Pi NoIR Bulk Camera Board V2The Raspberry Pi NoIR board V2 camera module is single channel, 8 megapixels and supports CSI-2 bus interface. It has a maximum frame rate capture of 30fps. This high definition (HD) NoIR camera board connects to any Raspberry Pi or compute module, allowing you to create HD videos and still photographs. The Pi NoIR (No Infrared) is the same as the standard camera module but without an IR filter and thus it is great for photography and videography in the dark. It utilises the IMX219PQ image sensor from Sony, which offers high-speed video imaging and high sensitivity. It also offers reduced image contamination such as fixed pattern noise and smearing. To connect the NoIR camera module to pi, a 15cm ribbon cable is attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, we can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs.Features and Benefits15-pin ribbon cable Automatic 50/60Hz luminance detection Automatic black level calibration Automatic exposure control, white balance and band filter High data capability High-quality imagery No IR filter Operating temperature ranges between -20°C and 60°C Supports 1080p, 720p60 and VGA90ApplicationsIdeal for capturing HD videos and still photographs at night Monitoring plant health and nocturnal animalsCertificationsANSI/ESD S20.20:2014 BS EN 61340-5-1:2007