Red Lion Magnetic Pickup / 9055289

LMPC000 – Cable with a length of 10 feet LMPCCooo – 3 Pin connector. Logic Magnetic Pickups. Logic Magnetic Pickups Super Sensitive LOGIC MAGNETIC PICKUPS (LMP ‘s) provide sensing sensitivities with several orders of magnitude that are greater than standard magnetic pickups when detecting moving ferrous targets. By locating a high gain pre-amplifier ; signal processing circuit inside the magnetic pick up housing, larger airgaps and slower target surface speeds can be achieved, thereby greatly expanding application versatility as compared with conventional magnetic pickups. Also these units have excellent noise immunity and a frequency response to 10 KHz. The stainless steel sensing pole is mounted flush to the plastic sensing face allowing greater ease of setting airgaps and eliminating snagging the pole with a moving target. Two output types are available: The NPN OpenCollector Transistor Output unit provides a negative going current sinking output with the approach of a ferrous target and is current limited to 40 mA. The Open Collector units are available with either an integrally potted 10, 25 or 50 foot 3-wire shielded cable with neoprene strain relief boot or a polarized 3-pin 5/8"-24 threaded connector for quick change versatility The Transistor Emitter-Follower Output unit provides positive going 5 V pulses with the approach of a ferrous target and can source 20 mA of load current. The Emitter-Follower output unit is available in the 3-pin connector version only. Super Sensitive Current sinking output OR current sourcing output Detects steel, sensing gears and other moving ferrous targets Built in pulse shaping amplifier Two output signal versions diameter stainless steel case Epoxy encapsulated sensor for oil ; dirt Moisture resistant Cable ; connector