Schmersal RSS 260 Series RFID Non-Contact Safety Switch, 20.4 → 26.4V dc, Plastic Housing, M8 / 8801826

Schmersal Safety SensorThe Schmersal RSSS260 series non-contact safety switch has a supply voltage rating of 26.4VDC. The switch with RFID technology is active in both the areas, i.e. lateral and front. The switching distance for the front is 12mm and lateral distance is 9mm. This sensor is designed for applications in safety circuits and used for monitoring the position of movable separating safety guards. In addition to its compact design and high protection against tampering, it is also suitable for removable, rotatable and sliding protection equipment. Note: Actuators must be ordered separately Actuators: Stock no. 880-1836 is for a swivel door with frame, no interfering contour of the door cut out Stock no. 880-1845 is for a Plexiglas door, flat design and discreet appearance Stock no. 880-1848 is for a sliding door, smallest size, embedded in PlexiglasFeatures and BenefitsTerminal type is M8 connector Thermoplastic enclosure Easy installation without additional angles Universal application through different targets for typical installation situations Repeated universal or individual coding Preservation of safety levels and diagnostic capability even when connected in series Maximum of 31 sensors can be wired in seriesCertificationsIP65 rated IP67 rated BG certified EAC certified IEC/EN60947-5-3 BG-GS-ET-14 IEC 60947-5-3 TUV approved