RS PRO Clevis Pins. Brought to you from the trusted brand RS PRO, a high-quality bright zinc plated clevis pin designed to connect components that rotate or swivel. Steel clevis pins are a type of fastener commonly used on agricultural machinery, motor engines, or as a replacement secure pin for jack stands. They are extremely versatile, easy to install, and locked into place via a retaining clip. Once installed the clevis pin will remain in place and will not work loose under vibration. Also referred to as. ;ul> ;li>Link pin ;/li> ;li>Hinge pin ;/li> ;/ul>. Features and Benefits. ;ul> ;li>Steel clevis pin ;/li> ;li>Bright Zinc Plated ;/li> ;li>Through-hole ;/li> ;li>Resistance to vibration ;/li> ;li>Corrosion resistant ;/li> ;li>Multiple sizes available separately ;/li> ;/ul>. Specification. ;ul> ;li>Mild steel construction ;/li> ;li>Imperial Diameter: 3/16 in, 1 /4 in, 5/16 in, 3/8 in ;/li> ;li>Length: 1 /2 in, 5/8 in, 3 /4 in, 1 in, 1-1 /4 in, 1-1/2 in ;/li> ;/ul>. You may also need!. RS PRO offer a selection of bright zinc-plated steel retaining clips compatible with clevis pins. Browse our offer using the improved filters to find you ideal solution. Working length of pin is less than nominal length. For 3/16 pins subtract 0·145in, for 1/4 pins 0·176, for 5/16 pins 0·224 and for 3/8 pins 0·25 from nominal length to find the working length. ;ul> ;li>RS stock no: ; 839-268 839-268 has a size designation and wire size (d) of 3/16 in x 1 mm ;/li> ;li>RS stock no: ; 839-274 839-274 has a size designation and wire size (d) of in x 1.2 mm ;/li> ;li>RS stock no: ; 839-280 839-280 has a size designation and wire size (d) of 5/16 in x 1.6 mm ;/li> ;li>RS stock no: ; 839-296 839-296 has a size designation and wire size (d) of 3/8 in x 1.8 mm ;/li> ;/ul>. Why RS PRO?. RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they ‘re only given the RS PRO seal of approval if we ‘re confident of their exceptional quality, which means you can be confident too. More information:  | | Part Type: | Clevis Pin | Diameter: | 3/8in | Length: | 1 1/2in | Material: | Steel | Finish: | Bright Zinc Plated |
|