Bare Conductive Touch Board, Arduino Compatible Board / 8371729

Bare Conductive Touch BoardThe Bare conductive touch is a microcontroller board with a dedicated capacitive touch and MP3 decoder ICs. It has a headphone socket and micro SD card holder (for file storage), as well as, 12 capacitive touch electrodes. This device is based around the ATmega32U4 and runs at 16MHz from 5V. It has a micro USB connector, a JST connector for an external lithium polymer (LiPo) cell, a power switch, and a reset button. This device resembles the Arduino Leonardo board and can be programmed using the Arduino IDE. The ATmega32U4 can appear to a connected computer as a mouse or a keyboard, (HID) serial port (CDC), or USB MIDI device. Note Electric Paint: 50ml jar RS Part No. 835-2693 and 10ml tube RS Part No. 835-2699Features and Benefits12 x analogue input channels 12 x touch electrodes of which 8 can be configured as extra GPIO with PWM capability 20 x GPIO pins maximum 3.5 mm audio out jack socket 7 x PWM channels Arduino compatible (recognised as an Arduino Leonardo in IDE) Arduino Rev 3 shield compatible (check pins available) ATMega32u4 16 MHz microcontroller, 32 KB flash memory, 2.5 KB SRAM, 1 KB EEPROM Bootloader uses 4 KB of flash memory Built in LiPo battery charger with status LED Easy-to-use platform External power socket MicroSD card slot MicroUSB socket Power slide switch Reset pushbutton VS1053B multi-format audio CODECApplicationsBy combining the touch board and bare conductive paint and we can turn almost any material or surface into a capacitive or proximity sensor Painting a light switch on your wall or making a paper piano or triggering a sound via the onboard MP3 player Touch-activated projects enabled by combining touch board with electric paintCertificationsANSI/ESD S20.20:2014 BS EN 61340-5-1:2007