EN standards certified by TÜV Rheinland, EN 954-1, EN ISO 13849-1, EN 60204-1, EN/IEC 60947-5-3, UL 508, CSA C22.2, BS 5304, EN 1088-1. IEC, IECEx, ATEX. Actuator. For suitable controller see the G9SA or G9SB from Omron, or the NE1A DeviceNet system. F3S-TGR Explosion Proof Non Contact Switch. The Omron F3S-TGR-N_X non-contact switch is designed to monitor the status of guard doors or the position of linear systems in explosive environments. The design includes wear-free non-contact operation for extended operation time and a robust mechanical setup to cover mechanical tolerances and vibrations. Explosion proof Connect up to 6 switches in series Operates behind stainless steel fittings Suitable for high pressure cleaning, CIP and SIP processes IP69K protection (pre-wired types) Conforms to safety categories up to PLe acc. EN ISO 13849-1 II 2G Ex mb IIC T6Gb, II 2D Ex mb IIC T80 Db IP67 (Product is fully encapsulated which is considered to provide Ingress Protection to at least IP67) Zone 1 Gas, Zone 21 Dust, Zone 2 Gas, Zone 21 Dust (An area where Gas and Dust is likely to occur in use) IEC/EN 60079-0, IEC/EN 60079-18 More information:  | | Supply Voltage: | 24V dc | Safety Contacts: | NO/2NC | Housing Material: | Stainless Steel | Connection Type: | 10m Cable | Actuator Type: | Magnetic | Safety Category: | 4 | Sensor Principle: | Magnetic | Actuator Included: | Yes | Series: | F3S-TGR-N_X | Switching Distance: | 10 mm | IP Rating: | IP69K | Length: | 37mm | Number of Approach Directions: | 6 | Width: | 15mm |
|