RS PRO 6bar Air Blow Gun, 1/4in Air Inlet (BSP) / 806779

These non-restricted type blow guns must only used on air lines which have a pressure regulator set at a maximum of 30 psi. To avoid risk of injury, these guns must only be used with either the dust bag or conveying hose. Always use approved eye protection when using these tools. Blow guns, unless correctly used, can prove dangerous; read instructions carefully. RS PRO Air Blow Gun – 6bar. RS PRO is proud to introduce this superb blow gun, created to extract chips from blind holes with depths of up to 450 mm. This deep-hole vacuum gun features a plastic probe that propels high-pressure air into gaps and holes, effectively dislodging particles. The primary nozzle then securely captures and removes the dislodged particles. Notably, the nozzle is enclosed to prevent any escaped particles, ensuring safety by minimizing the risk of injury. Features and Benefits. ;ul> ;li>Deep hole vacuum gun ;/li> ;li>Special version designed for removing dust, debris and swarf from blind holes up to 18 inches deep ;/li> ;li> Plastic probe jets high-pressure air into the hole to dislodge particles ;/li> ;li>Safely sucked away by the main nozzle ;/li> ;li> Main nozzle shrouded to prevent particles escaping and causing injury ;/li> ;li> 1/4in BSP Inlet ;/li> ;li> Max working pressure 6 bar ;/li> ;li> Accessories available separately ;/li> ;/ul>