RF Solutions RADIOPi Modem Dongle for Raspberry Pi / 7934418

ETSI. Antenna with SMA connector. Factory default settings: Rx / Tx addresses: 7F7F7F, Carrier: 869.45MHz (Channel 2), Tx Power: +20dBm, Data Rate: 19.2kbps. RADIOPi Modem Dongle for Raspberry Pi. The RADIOPi wireless dongle is an easy to use plug and play RF Modem link and it will transmit directly to the BLIZZARD Radio Modem ; 793-4391 793-4391 and ZULU Radio Module types such as ; 761-9869 761-9869. Operation Modes: One-to-One: point to point serial cable replacement Broadcast Mode: single master sending to many slaves on the same address One-to-Many: single master sending to many slaves on indvidual addresses Many-to-One: many transmitters sending to a single slave. Operating frequency range: 868 to 870MHz ISM/SRD-band with 5 channels RF Output Power: up to +20dBm Receiver Sensitivity: -116dBm Data Rate: up to 56kbps Range: up to 1000m Powered from USB socket SMA antenna connector Operating temperature range: -40 to +85°C Applications: Remote networking, M2M communications, USB cable replacement and local communication for the Internet-of-Things (IoT)