STM32F3 series Evaluation Board (STM32F373 MCU). The STM32373C-EVAL Evaluation Board is designed as a complete demonstration and development platform for STMicroelectronic ‘s ARM Cortex-M4 core-based STM32F373VCT6 microcontroller. It features two I²Cs, three SPIs, three USARTs, one CAN, one CEC controller, one 12-bit ADC, three 16-bit Sigma-Delta ADCs, three 12-bit DACs, internal 32-KByte SRAM and 256-KByte Flash, touch sensing slider, USB FS, and JTAG debugging support. This evaluation board can be used as a reference design for user application development but it is not considered as the final application. The full range of hardware features on the board can help the user evaluate all peripherals (USB FS, USART, audio DAC, microphone ADC, dot-matrix LCD, IrDA, LDR, MicroSD card, HDMI CEC, ECG, pressure sensor, CAN, IR transmitter and receiver, EEPROM, touch slider, temperature sensor, etc.) and develop their own applications. Extension headers make it possible to easily connect a daughter board or wrapping board for a specific application. An ST-LINK/V2 is integrated on the board as an embedded in-circuit debugger and programmer for the STM32 MCU. STM32F373VCT6 Microcontroller Four 5V Power Supply options: Power jack ST-LINK/V2 USB Connector User USB Connector Daughter Board Audio jack connected to I²S DAC Microphone connected to ADC through an amplifier 2GByte (or more) MicroSD card on SPI Three components on I²C bus: Temperature Sensor, EEPROM and dual interface RF EEPROM RS-232 communication configurable for communication of Flash loader IrDA Transceiver 240x320 TFT colour LCD connected to SPI interface Joystick with 4-direction control and selector Reset, Wakeup or Tamper, and Key buttons 4 colour user LEDs 2 LEDs for MCU power range indicator ECG, Pressure Sensor and PT100 Temperature Sensor connected to the 16-bit Sigma-Delta ADC of STM32F373VCT6 Extension connectors for daughter board or wrapping board MCU voltage: 3.3V or adjustable 2.0V - 3.6V USB FS Connector Touch Slider Real Time Clock (RTC) with backup battery CAN 2.0 A/B compliant connection Light Dependent Resistor (LDR) Two HDMI connectors with DDC and CEC IR Transmitter and Receiver Two ADC ; DAC input and output signal connectors and one Sigma-Delta ADC input signal connector Potentiometer JTAG/SWD and ETM trace debug support Embedded ST-LINK/V2 More information:  | | Classification: | Evaluation Board | Technology: | MCU | Processor Family Name: | STM | Processor Part Number: | STM32F373 |
|