Terasic SDI to HSMC Adapter Board P0039 / 7689035

System CD ROM. Terasic SDI HSMC Board. The Transceiver Serial Digital Interface (SDI) HSMC board provides a hardware platform for developing video broadcasting systems. It is intended to be used by customers to implement and design SDI and AES systems based on transceiver-based host boards with an HSMC interface. It can also be part of an openly sold Development Kit, or bundled with packages of software and IP cores. 2 x SDI transmit (TX) channels with SDI cable tri-speed drivers 2 x SDI receive (RX) channels with SDI cable equalizers 2 x 75Ω BNC SDI TX interfaces 2 x 75Ω BNC SDI RX interfaces Adjustable 1.1 to 1.8V and standard 3.3V CMOS Input Signal Levels 2 x RS-422 transceivers for AES3 TX and AES3 RX channels 2 x 75Ω BNC AES3 RX interfaces 2 x 75Ω BNC AES3 TX interfaces High frequency switching regulator for 12V to 5V power supply conversion 3 x linear regulators for 5V to 3.3V low noise power supply conversion FDTIM analysis for power distribution network (PDN) decoupling SDI multi-frequency VCXO femto clock video PLL 98.304MHz / 90.3168MHz / 122.88MHz / 112.896MHz voltage-controlled crystal oscillator (VCXO) based phase-locked loop (PLL) LVPECL differential clock buffer with two differential outputs - HSMC and SMA 4 x digital audio isolation transformers Multi-format video sync separator HSMC connector for interface conversion, fully compatible with HSMC host boards