Vega VEGAWAVE 61 Series Vibrating Level Switch Vibrating Level Switch, Relay Output, Cable, ATEX-Rated / 7682000

Vega Vibrating Level SwitchThe Vega vibrating level switch has a relay (DPDT) output. It is energized by a piezo crystal and it vibrates at a fixed amplitude. If the vibrating rod is covered by the product, the amplitude change is detected by the integral electronics and converted into a switch signal. The switching condition is visible from outside via a two-colour LED. Vibrating Liquid/Solid Level Probes - Squings. All of these probes are maintenance-free and have an external LED switch status indication.Features and BenefitsThe supply voltage ranging from 20VAC to 253VAC and 20VDC to 72VDC Process fitting material is thread G1 PN25, DIN3852-A Easy setup without adjustment Product-independent switching point Rugged sensor construction Insensitive to build-up and statically charged products Solid densities from 8g/l reliably detected maintenance-free and does not wear out easily External LED switch Housing material PBT (plastic) Density is greater than 100g/l Breaking capacity maximum 750VA, 54WApplicationsTypical applications are overfill and low-level detection in media like grain, fine aggregates, sand and heavier powders such as cement and metal oxides Almost all the bulk solids applicationsCertificationsIP66 rated IP67 rated ATEX II 1/3 D IP6X T