FTDI Chip C232HD-DDHSP-0 / 7511172

FTDI Chip USB To UART CableThe FTDI chip USB 2.0 high-speed to UART cable incorporates FTDI’s FT232H USB to UART interface IC device that handles all the USB signalling and protocols. The cable provides a fast and simple way to connect devices with 3.3V digital interfaces to USB. This cable contains a small internal electronic circuit board, utilising the FT232H, encapsulated into the USB connector end of the cable. It has a single pole, receptaclex10 end connector.Features and BenefitsAdjustable receive buffer timeout Asynchronous UART transfer data rate up to 12Mbaud Fully assisted hardware or X-On/X-Off software handshaking Low operating and USB suspend current Low USB bandwidth consumption Maximum output of 450mA at 5VDC on VCC Operating temperature ranges between -40°C and 85°C Receive and transmit buffers of 1kb for high data throughput Support for USB suspend and resume Ten core cable with length of 1.8m Transmit and receive LEDs UART interface support for 7 or 8 data bits,1 or 2 stop bits and odd/even/mark /space/no parity UHCI/OHCI/EHCI host controller compatible USB 2.0 Hi-Speed (480Mbps) and full speed (12Mbps) compatible USB bus powered USB Type A connector for direct connection to USB host or hubApplicationsElectronic systems Prototyping platform for USB interface on Rapid USB integration into existing Set Top Box PC - USB interface Upgrading legacy peripherals to USB USB bar code readers USB digital camera interface USB hardware modems USB industrial control USB instrumentation USB Medical applications USB to RS232/RS422/RS485 converters USB wireless modemsCertificationsCE FCC approved