|  |
| |
| Item number:
2794E-7068577 Manufacturer no.:
MTL20 EAN/GTIN:
n/a |
| |
|
| | |
| Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit. Right angled probe tip, two straight tips and instructions. Drummond Test Lamp MTL20. Bright LED indication of voltage between 50V and 500V AC/DC Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems Additional two button test allows the unit to draw a high current to differentiate between potentially hazardous phantom voltages and hazardous persistent voltages Finger shields and insulated probe tips with only 4mm of exposed metal Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant Meets the UK Health and Safety Executive guidance notes on electrician ‘s test lamp (GS38) Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V No batteries required More information: | | Maximum Voltage: | 500V ac/dc | Safety Category: | CAT III 1000 V, CAT IV 600V | Display Type: | LED | IP Rating: | IP67 | Power Source: | Mains | Dimensions: | 213 x 112 x 72mm | Weight: | 350g | Height: | 72mm | Length: | 213mm | Maximum Operating Temperature: | +55°C | Minimum Operating Temperature: | -10°C | Model Number (p): | DRUMTL20 | Safety Category Level: | CAT III, CAT IV | Safety Category Voltage: | 600 V, 1000 V | Width: | 112mm |
|
| | |
| | | |
| Other search terms: Voltage testing device, Voltage testing devices, Voltage detector, Voltage detectors, martindale voltage tester, led tester, 7068577, Test & Measurement, Electrical Test & Measurement, Voltage Testers, John Drummond, MTL20 |
| | |
| |