Mitsubishi PLC Expansion Module for Use with FX3U Series / 7054916

The ADP modules fit on the left-hand side of FX3U base units and require one of the following modules to connect to the PLC: FX3U-232-BD ( ; 539-0869 539-0869 ), FX3U-422-BD ( ; 539-0875 539-0875 ), FX3U-485-BD ( ; 539-0881 539-0881 ), FX3U-USB-BD ( ; 539-0897 539-0897 ), FX3U-CNV-BD ( ; 539-0904 539-0904 ) A maximum of two ADP communications modules or one ADP and one BD communications modules can be fitted at any one time to a base unit. Supply voltage is taken from PLC base unit. Communication Modules . Six communication modules for use with FX3U PLCs. The ADP modules fit on to the left hand side of the base unit while the BD modules clip into the front left corner of the base unit. The RS232 interfaces can be used for applications such as communication with a PC, printer or bar code reader while the RS422 interfaces provide a second programming port which enables an operator panel (HMI) and a programming PC to be connected at the same time. The RS 485 interfaces allow networking of FX PLCs and a simple way of connecting to Mitsubishi inverter drives using the built-in protocol instructions. The USB BD module offers connectivity to PCs via USB for programming purposes.