FTDI Chip Development Kit USB-RS422-PCBA / 6877840

FTDI Chip Interface BoardThe FTDI Chip interface board is a USB to RS422 level serial UART converter PCB incorporating FTDI’s FT232RQ USB to serial UART interface IC device, which handles all the USB signalling and protocols. The PCB provides a fast and simple way to connect devices with an RS422 interface to a USB. Each module contains a small internal electronic circuit board, utilising the FT232R plus a USB Type-A connector. The board requires USB drivers which are used to make the FT232R on the PCB appear as a virtual COM port (VCP). This then allows the user to communicate with the USB interface via a standard PC serial emulation port. These converters are supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux. Versions Available: (687-7825) - USB to RS232 UART Serial Converter (687-7840) - USB to RS422 UART Serial Converter (687-7837) - USB to RS485 UART Serial ConverterFeatures and BenefitsSerial UART interface Entire USB protocol handled by the electronics on the PCB EIA/TIA-422 interface with low power requirements Data transfer rates from 300 baud up to 3Mbaud Internal EEPROM with user writeable area PCB is USB powered, no external supply required Low USB bandwidth consumption UHCI/OHCI/EHCI host controller compatible.USB 2.0 full speed compatible Operating temperature range -40°C and 85°CApplicationsUSB to serial RS422 level converter Upgrading legacy peripherals to USB Interface microcontroller UART or I/O to USB Interface FPGA/PLD to USB USB instrumentation PC interface USB industrial control USB password protected file transferCertificationsANSI/ESD S20.20:2014 BS EN 61340-5-1:2007 CE FCC certified