Xylem Lowara Water PumpThe Xylem Lowara jet self-priming water pump is used for boosting and distributing clean water in domestic/industrial systems on a continuous or intermittent basis. Its maximum flow rate is 50L/min. The pump features a Venturi system, ensuring excellent hydraulic efficiency and considerable pressure capacity. Caution: Do not use for volatile low flash point solvents or fuels. Also, not suitable for flammable liquids or in explosive atmospheres.Features and BenefitsThe supply voltage is 240V Input power is 1.03kW Maximum fluid temperature is 50°C Maximum working pressure is 6bar Cast iron body and motor shroud Techno polymer impeller with stainless steel shear ring Stainless steel shaft with graphite/ceramic mechanical seal Will self-prime up to 8mCertificationsCE approved IP44 rated More information: | | Maximum Flow Rate: | 50L/min | Supply Voltage: | 240 V | Input Connection: | 1 in G | Maximum Working Pressure: | 6 bar | Body Material: | Iron | Coupling Type: | Direct | Input Power: | 1.03kW | Maximum Fluid Temperature: | +50°C | Input Connection Size: | 1in | Output Connection Size: | 1in | IP Rating: | IP44 |
|