Pilz PNOZmulti Series Safety Controller, 20 Safety Inputs, 6 Safety Outputs, 24 V dc / 6192672

Pilz Safety ControllerThe Pilz PNOZmulti series is a 20 safety inputs and 6 safety outputs safety controller. This is an innovative device with positive guided relay outputs and semiconductor outputs. The safety function remains effective in the case of a component failure. The relay contacts meet the requirements for safe separation through increased insulation. The safety outputs are tested periodically using a disconnection test. Note Configuration software and pre: license sold separately Call Pilz to register, this activates the software and is used for technical queries and support from Pilz In order to program the controller from your PC, you will need an adaptor and cable Inclusion: Plug: in screw terminals and 32K SIM cardFeatures and BenefitsE-STOP pushbutton Two: hand button Safety gate limit switch Reset button Light barrier Scanner Enable switch PSEN – operating mode selector switch – safety mat LED indicator for diagnostics, supply voltage, output circuits, and input circuits Circuit is redundant with built: in self: monitoring Maximum 8 expansion modules and 1 fieldbus module can be connected Monitors shorts between the safety outputs Plug: in connection terminals (either cage clamp terminal or screw terminal)CertificationsUL listed CCC certified BG certified VDE 0113Part 1 EN 60204: 1 GOST R certified TUV certified NFPA 79: 2002