RS PRO Hand Ratcheting Crimp Tool for Insulated Spade Connectors, 0,75 → 6mm² Wire / 533279

Risk of electric shock. Do not use this tool on live wire. RS Pro Crimp Tool For 6.0 mm² to 0.75 mm² Insulated Terminals. The ; 533-279 533-279 is an Original line hand crimp tool for insulated terminals in the range from 6.0 mm² to 0.75 mm² /AWG 22 to AWG10. The tool is designed to provide consistent and reliable crimp connections on end splices/ferrules wires. Also known as Red, Blue and Yellow terminals. See stock numbers ; 534-238 534-238 , ; 534-597 534-597 , ; 534-468 534-468 typically. Symmetrical oval crimps are produced for the insulation and conductor barrel, either right or left handed. Features and Benefits. Versatile and easy to use for right hand or left hand users Non-slip main handle and low friction moving handle ensue a comfortable hand grip Provides two-hand grip in the final phase of crimping, increasing comfort and productivity Full cycle crimp mechanism to ensure consistent, reliable crimp Ratchet release mechanism to clear mis-crimps and obstructions Precision eccentric adjustment for consistent performance and ability to calibrate Each tool has a unique serial number for traceability Durable: life span exceeds 50000 cycles High strength, through hardened alloy Swedish steel construction. How to maintain the product?. To maintain a good function and long life: Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly *Use a light mineral-free oil. Typical applications. Maintenance ; repair. How to use?. Open the tool. Insert terminal and wire in die nest from front. Close tool until ratchet release. Attention: To release ratchet mechanism, push the trigger forward when holding handles.