|  |
| |
| Item number:
2794E-4928924 Manufacturer no.:
SSF67A25B125 EAN/GTIN:
5059040029972 |
| |
|
| | |
| The Cable entry point must NOT under any circumstances be submerged. On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside. On the vertical type the mounting thread and cable entry must be above the highest level of the liquid. All ratings in tech. spec. table are for resistive loads only. Dual Position Stainless Steel Float Switch. Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications. Two Independent Switching Points Lower Float Make on Fall, and Upper Float Make on Rise Minimum Fluid SG: 0.80 Switch Differential (each level) Nominal: 1mm Suitable for High and Low Level Alarm and Control Signal Stainless Steel 316L for Use with Aggressive Liquids, or in Hygienic Applications Vertical Mounting, M16 x 2 Thread Temperature Range: -20 to +135°C Nitrile Gasket ‘Safe Area ‘ for Use in Petrochemical, Storage, and Process Control Applications More information: | | Device Type: | Float | Mounting Type: | Vertical | Switch Output: | Direct Load | Body Material: | Stainless Steel | Minimum Operating Temperature: | -20°C | Maximum Operating Temperature: | +135°C | Maximum Current: | 600 mA | Maximum Pressure: | 10bar | Gasket Material: | Nitrile | Series: | SSF67 |
|
| | |
| | | |
| | | |
| |