|  |
| |
| Item number:
2794E-4896394 Manufacturer no.:
777949 EAN/GTIN:
4046548009156 |
| |
|
| | |
| VDE 0113; EN 60204-1; IEC 204-1. BG, UL, CUL. PSWZX1P Safety Relay by PILZ. The PSWZX1P range of safety relays from PILZ offers you safety and performance all in one. The PSWZX1P offers you different modes of operation such as single or dual channel switches. Suitable specifically for operating your safe standstill machinery or tools that are deemed dangerous or hazardous to health. Features and benefits:. DIN rail mounted with screw terminals LED display that offers you the following measures: - Supply voltages - Standstill on Channel 1 / 2 - Switch status - Fault signal if simultaneity time is exceeded Semiconductor output signal (input for reset function): - Error - Switch status Measure inputs for single or three-phase motors Measuring voltage is selectable Feedback loop is in operation Plug in connection terminals is possible. Safety features:. Relays K1 ; K2 are interlocked specifically designed so that the unit cannot be switched back on in the case of contact welding or an open circuit (ensuring your safety at all times) The unit will monitor and measure and look out for an open circuit. If the circuit does open, the unit will immediately switch itself off to prevent hazards The standstill motor which is unique to the PSWZ X1P prevents the plant from being enabled, in the following cases: - Power supply failure - Component failure - Measuring circuits are open circuit - Coil deflect / open circuit. Applications:. B>Safe standstill monitoring – this is the units main purpose and is specifically designed for safe standstill where areas of operation such as plants have dangerous machinery or tools in use. Safe standstill monitoring is only detected on power free measuring circuits. Any residual voltages, induced voltages or drives with in the position control will prevent the relay from its main function so take this into consideration when in use. Technical safety parameters:. EN 60204-1 EN 62061 EN ISO 13849-1 EN ISO 14119 VDE 0113-1 More information: | | Supply Voltage: | 24 → 240V ac/dc | Number of Channels: | 1, 2 | Safety Contacts: | 2 | Function: | Speed/Standstill Monitoring | Auxiliary Contacts: | 1 | Range: | PNOZ X | Safety Category (ISO 13849-1): | 3 | PL (ISO 13849-1): | e | SIL (IEC 61508): | 3 | Terminal Type: | Screw | Depth: | 121mm | Series: | PSWZ X1P | Width: | 45mm | Length: | 94mm | Performance Level: | e |
|
| | |
| | | |
| Other search terms: Voltage monitoring relay, Voltage monitoring relays, Emergency stop module, Emergency stop modules, Emergency stop switching device, Emergency stop switching devices, Emergency stop relay, Emergency stop relays, Phase unbalance relay, Phase unbalance relays, Phase error relay, Phase error relays, Phase sequence-change relay, Phase sequence-change relays, Phase sequence relay, Phase sequence relays, Phase monitoring relay, Phase monitoring relays, Relay module, Safety relay, Safety relays, Safety device, Safety devices, Speed monitoring relay, Speed monitoring relays, Standstill monitor, Standstill monitors, Standstill monitoring relay, Standstill monitoring relays, Speedometer relay, Speedometer relays, Monitoring relays, safety relay pilz, safety relay, 4896394, Relays & Signal Conditioning, Relays, Safety Relays, Pilz, 777949 |
| | |
| |