|  |
| |
| Item number:
2794E-410460 Manufacturer no.:
PRT-F10 EAN/GTIN:
5059041481144 |
| |
|
| | |
| All logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing o-rings are in the bottom of each unit. Timer Module. A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay. Very Reliable Long Life Expectancy More information: | | Maximum Time: | 3s | Minimum Time: | 0.1s | Maximum Operating Temperature: | +60°C | Manufacturer Series: | PRT | Minimum Operating Pressure: | 3bar | Maximum Operating Pressure: | 8 bar | Minimum Operating Temperature: | -15°C |
|
| | |
| | | |
| Other search terms: Electromagnetic valve, Electromagnetic valves, Pneumatic solenoid valve, Pneumatic solenoid valves, Pneumatic timer, Pneumatic timers, Pneumatic time module, Pneumatic time modules, Directional control valve, Way valve, Directional control valves, Way valves, Time delay valve, parker solenoid valve, hydraulic pressure filter, 410460, Pneumatics & Hydraulics, Pneumatic Counters, Logic Controllers & Timers, Pneumatic Timers, Parker, PRTF10 |
| | |
| |