Pilz Single-Channel Safety Switch/Interlock Safety Relay, 24V ac/dc, 3 Safety Contacts / 2391033

PILZ PNOZ X1 Safety Relay, Single Channel. The PNOZ X1 series from PILZ is a reliable and affordable safety relay that will give you the confidence to run your safety circuits in a safe manner. Features and benefits. Specially designed for two handed control/operation. The P2HZ series will not function unless the operator has their hands outside the danger zone area during hazardous movement. LED indicator for switching your channel status from 1 to 2 and also to monitor your supply voltage Single or Dual channel input operation (Single channel are used more beneficially with smaller type machines where you need to use a dedicated logic device that only has a small function to cut off in an emergency – Dual allows you to take control of more safety circuits and control a greater amount of control zones at any given time) Suitable for DIN rail mounting Durable and has an extended service life vs. competitors. Safety features. The relay will provide the circuit self-monitoring. The safety functions of the device remain in effect even in the case of component failures. The correct opening and closing of the safety relays functions are tested automatically at the end of each on/off cycle. Applications. Mechanical presses Hydraulic presses General safety circuits (in accordance with EN 60204-1) Emergency stop buttons Safety curtains. Technical safety parameters. EN 60204-1 EN 954-1 EN (IEC) 62061 EN ISO 13849-1 IEC 61511 – SIL 3