Sensata / Cynergy3 RSF30 Series Horizontal Polypropylene Float Switch, Float, 1m Cable, NO/NC, 300V ac Max, 300V dc Max / 2281992

Cynergy3 Float SwitchThe Cynergy3 RFS30 series float switch is horizontal mount type and has NO/NC output configuration. This float switch has a polyethylene body. This is a higher power, side-entry, internally fitted switch. This switch is used for directly switching some small loads of less than 100VA. Fitting of this type requires access to the inside of the tank. These are side mounting switches consisting of a reed switch and pivoted actuator magnet encapsulated in a waterproof housing. The switch action may be reversed by rotating the device through 180°. Note: Suitable for signal switching and use with transistorised input/ low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e. G. filament lamps) loads. Inclusions: 1m long, PVC 16// 0.2 cable.Features and BenefitsMinimum fluid SG is 0.85 Operating temperature ranges between -20°C and 100°C Cable length is 1m Maximum switching power is 100VA Leadouts:100cm PVC 16/0.2CertificationsWRAS approved UL listed