Eaton Switch Disconnector Auxiliary Switch, Eaton Moeller Series for Use with P1.../E Series, P1.../EA Series, P1.../EZ / 2191445

Eaton Panel Mount Isolator Switch. Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring, manually disconnecting the power supply to isolated parts of the circuit. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications. Features ; Benefits. The perfect solution for installing as a safety measure Used as an emergency switching off/emergency stop device The basic functions are when used as a main switch, maintenance switch or manual override switch Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions Rated uninterrupted current of up to 32 A Lockable in the 0/OFF position, with up to three padlocks Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish Common accessories: ; 262-3784 262-3784 , ; 219-1445 219-1445 , ; 219-1439 219-1439. What is the difference between a fused switch disconnector and a non-fused switch disconnector?. Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.