Sefram MW3950B Clamp Meter, Max Current 60A ac CAT III 600V / 2175202

The Sefram MW3950B is the ideal tool for measuring leakage currents. Measure the leakage currents present on the earth, determine the leakage in a cable by positioning the clamp directly around a cable (without the earth wire), also measure currents up to 60A AC with a resolution of 1μA.with its Bluetooth interface and its application dedicated to tablets or smartphones (Android or IOS), you can monitor your measurements and record them in real time. Then export the data via the tablet or the smartphone in .csv file in order to be able to process them in a spreadsheet software. By comparing one transmitting end and the corresponding receiving end, the SEFRAM 96 also can test installed cable far away by using the receiving unit. The tester provides the variety for wiring check, such as cable continuity, open status, short status and miss-wired.LCD 6000 counts with backlight Current measurement up to 60A AC Minimum resolution : 1μA Low pass filter Maximum Jaw Opening : 42mm High Frequency Rejection (selectable : 50Hz, 60Hz & 1kHz) True RMS reading Manual and Automatic range Max, Min and HOLD functions Bluetooth interface to save reading values Torch light