|  |
| |
| Item number:
2794E-1913811 Manufacturer no.:
HK1414-RS-L271 EAN/GTIN:
n/a |
| |
|
| | |
| Are particularly suitable for applications with a very small radial section height on account of their very low cross-sectional height Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies Can support high radial loads (are pure radial bearings) Require a considerably smaller radial design envelope than machined needle roller bearings Usually run directly on the shaft (no inner ring) Permit relatively high speeds Are easy to mount Require no additional means of axial retention (as a result of which the housing bore is easy to produce) Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end) Result in particularly compact, cost-effective and economical bearing arrangements More information: | | Inside Diameter: | 14mm | Outside Diameter: | 20mm | Roller Bearing Type: | Drawn Cup Needle | Race Width: | 14mm | Bore Type: | Parallel | Static Load Rating: | 8500N | Cage Material: | Sheet Steel | Number of Rows: | 1 | Dynamic Load Rating: | 7100N | End Type: | Sealed | Fatigue Limit Load: | 1030N |
|
| | |
| | | |
| Other search terms: Drawn cup needle roller bearings with open ends, Drawn cup needle roller bearing with open ends, Drawn cup roller bearing with open end, Drawn cup roller bearings with open end, Combined needle roller bearings, Combined needle roller bearing, Needle roller bearing combined, Needle roller bearings combined, drawn cup needle roller bearing with closed end, 1913811, Bearings & Seals, Rotary Bearings & Housing Units, Roller Bearings, INA, HK1414RSL271 |
| | |
| |