FAG 32303-A 17mm I.D Taper Roller Bearing, 47mm O.D / 1908380

High radial loads occur High axial loads act on one side Combined loads must be supported (radial and axial forces acting simultaneously) Precise axial guidance of the shaft is required (locating bearing function) The bearing arrangement must have very high axial rigidity The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other) High running accuracy is required The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required The bearings are not required to compensate misalignments The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity