|  |
| |
| Item number:
2794E-1908325 Manufacturer no.:
16004-A-2Z EAN/GTIN:
n/a |
| |
|
| | |
| High and very high speeds are required The bearing arrangement must be operated with very low friction Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C) High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C) The bearing position is to be designed particularly economically Double row bearings can be considered for bearing arrangements where: The load carrying capacity of single row deep groove ball bearings is no longer sufficient Axial loads in both directions and/or tilting moments must be supported in addition to radial loads A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small More information: | | Inside Diameter: | 20mm | Outside Diameter: | 42mm | Race Width: | 8mm | Ball Bearing Type: | Single Row Deep Groove Ball Bearing | Sealing Arrangement: | Both Sides Shielded | Bearing Clearance: | CN | Material: | Steel | Ball Material: | Steel | Cage Material: | Steel | Number of Rows: | 1 | Static Load Rating: | 4.1kN | Dynamic Load Rating: | 7.4kN | Bore Type: | Parallel | Bearing Series: | 0 Extra Light | Partial Bearing Code: | 16004 |
|
| | |
| | | |
| | | |
| |