MikroElektronika Opto 2 Click Module MIKROE-3015 / 1840888

Opto 2 click is a galvanic isolator Click board™, used to provide an optical isolation of sensitive microcontroller (MCU) pins, when operated by external signals. TLP2770 opto-isolation elements (optocouplers) can be driven with a very low current, down to 1.3mA (min). A choice of high-speed optocouplers allows Opto 2 click to be used on communication lines, with up to 20 Mbps data rates. This Click board™ can be used to provide an optical isolation when there is a requirement for a high reinforced isolation between the external signal lines and the controller logic with a MCU such as in PLCs or similar applicationsProgrammable Logic Controllers (PLCs) Battery Management System (BMS) Industrial Inverters Package: SO6L Data transfer rate: 20 MBd (typ.) (NRZ) Supply current: 0.4 mA (max) Threshold input current: 1 mA (max) Supply voltage: 2.7 to 5.5 V Operating temperature: -40 to 125  Propagation delay time: tpHL/tpLH = 60 ns (max) Pulse width distortion: /tpHL-tpLH/ = 25 ns (max) Isolation voltage: 5000 Vrms (min)