Microchip 512-Kb FPGA configuration EEPROM with Altera Pinout provides easy-to-use, cost-effective configuration memory for FPGAs. It comes in 8-lead PDIP and the 20-lead PLCC packages. This EEPROM can configure one or more FPGA devices through a simple serial-access procedure. Users can select the polarity of the reset function by programming four EEPROM bytes.EE Programmable Serial Memories Designed to Store Configuration Programs for Altera® FLEX® and APEX™ Field Programmable Gate Arrays (FPGA) Supports both 3.3V and 5.0V Operating Voltage Applications In-System Programmable (ISP) via 2-wire Bus Simple Interface to SRAM FPGAs Compatible with the Atmel AT6000, AT40K and AT94K Devices, Altera FLEX, APEX Devices, ORCA® FPGAs, Xilinx® XC3000, XC4000, XC5200, Spartan®, Virtex™ FPGAs, Motorola MPA1000 FPGAs Cascadable Read-back to Support Additional Configurations or Higher-density Arrays Very Low-power CMOS EEPROM Process Programmable Reset Polarity 8-lead PDIP and 20-lead PLCC More information:  | | Memory Size: | 512kbit | Package Type: | PDIP | Mounting Type: | Through Hole | Pin Count: | 8 | Organisation: | 524288 Word x 1 bit | Minimum Operating Supply Voltage: | 3 V | Maximum Operating Supply Voltage: | 5.5 V | Programming Voltage: | 3 → 5.5V | Number of Bits per Word: | 1bit | Dimensions: | 0.4 x 0.28 x 0.19in | Data Retention: | 90yr | Maximum Operating Temperature: | +85 °C | Minimum Operating Temperature: | -40 °C | Number of Words: | 524288 |
|