Infineon CYW43907 WiFi Development Kit CYW943907AEVAL1F / 1446503

Quick Start Guide, USB-A to Micro-B cable. CYW43907 2.4/5GHz WiFi Evaluation Kit. The CYW 943907 AEVAL 1F evaluation kit enables customers to evaluate and develop single-chip WiFi applications based upon Cypress CYW43907 devices. The kit makes use of the WICED Studio 5.0 IDE. It has an embedded TCP/IP network stack, security supplicant and other network application features. Murata CYW43907-1GC Cortex-R4 SoC WiFi/Ethernet SIP Module. Wireless Protocol: IEEE 802.11a/b/g/n. RF Frequency Ranges: 2.4GHz and 5.8GHz. RF Output Power: +12dBm @ 65Mbps, +17dBm @ 11Mbps. Receiver Sensitivity: -75dBm @ 65Mbps (2.4GHz), -73dBm @ 65Mbps (5.8GHz). On-board programmer/debugger using USB interface and USB-UART bridge. On-board MAX11615 6-channel 12-bit ADC on I²C bus. On-board BCM5241 Ethernet PHY chip. Host communication: Ethernet, SPI, I²C, UART. 6 x PWM outputs. Reset pushbutton. 2 x User pushbuttons. 2 x User LEDs. RJ45 socket for Ethernet connection. MicroSD card slot. 2 x PCB antennas for antenna diversity. 2 x External antenna sockets. 10-pin JTAG connector for CYW43907 programming/debug. 44-pin WICED GPIO header. Arduino r3 compatible Shield headers. Power supply: +5Vdc from USB micro-B socket or +5 to +12Vdc via barrel jack socket