RS PRO Non Contact Voltage Indicator, 230V ac to 1000V ac / 1411995

Only use with GP Alkaline GN24A, LR03, Size AAA. RS Pro Volt Stick Non-Contact Voltage Detector. The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable. Features and Benefits:. Voltage Range: 230 V ac - 1000 V ac Sensitivity: Illuminates red at 4 mm distance from wire carrying 230 V ac Power: 2 x AAA batteries (Included) Altitude: ; 2000 m RH: 80% @ 30°C, 50% @ 40°C Operating Temperature: -20°C to +40°C Over Voltage: CAT III 1000 V Weight: 50 gm Length: 151 mm Diameter: 18 mm IEC61010-1 CAT III 1000 V ac. Note. Only use with GP Alkaline GN24A, LR03, Size AAA. What is a non contact voltage tester used for?. Locating breaks in cables Detecting blown fuses inside plugs of fuse holders Distinguishing between live and neutral wires in both single and 3 phase supply Identifying faulty inline switches Checking function of circuit breakers Locating defective in-series light bulbs