Digilent 410-300 GENESYS2 KINTEX-7 Development Board / 1346471

USB-A to Micro-B cable. Genesys 2 Kintex-7 FPGA Development Board. The Digilent Genesys 2 board is a digital circuit development platform based on the Kintex-7™ Field Programmable Gate Array (FPGA) from Xilinx. Genesys 2 is well suited for data and video processing applications. Genesys 2 is compatible with Vivado Design Suite as well as the ISE toolset, which includes ChipScope and EDK. XC7K325T-2FFG900C FPGA Features. 50950 logic slices each with 4 x 6-input LUTs and 8 x flip-flops Close to 16Mbits of fast block RAM 10 x clock management tiles, each with phase-locked loop (PLL) 840 x DSP slices Internal clock speeds exceeding 450MHz On-chip analogue-to-digital converter (XADC) Up to 10.3125Gbps gigabit transceivers 1800Mbps DDR3 data rate with 32-bit data width Commercial -2 speed grade. Genesys 2 Board Features. On-board 2 x MT41J256M16HA-107 1GiB DDR3 SDRAM memory On-board S25FL256S 256Mbit Quad-SPI serial NOR Flash memory On-board ADAU1761 SigmaDSP stereo audio CODEC On-board FT2232R USB-UART bridge controller On-board RTL8211E-VL Ethernet PHY 0.91in 128 x 32pixel OLED display microSD card slot On-board USB-JTAG programming via microUSB connector JTAG 6-pin header RJ45 socket for 10/100/1000 Ethernet LAN USB-A OTG 2.0 socket USB-A Host MSD/HID socket HDMI display (source) socket HDMI display (sink) socket DisplayPort (source) mDP socket DisplayPort (sink) mDP socket VGA display (16-bit colour) DE15 socket HPC FMC 400-pin connector with 10 x GTX lanes 4 x 3.5mm jack sockets for Microphone, Line In, Line Out, Headphones 5 x 12-pin Pmod™ expansion connectors +12Vdc power supply barrel jack socket Cooling fan for FPGA device Power slide-switch Reset pushbutton Programming pushbutton 8 x User slide-switches 5 x User pushbuttons Power LED Programming Done LED Ethernet Activity LEDs 8 x User LEDs