Microchip ATPOWERDEBUGGER for use with Debugging & Programming ARM Cortex-M / 1345581

Power Debugger. The Power Debugger is a powerful development tool for debugging and programming AVR microcontrollers. The tool is using UPDI, JTAG, PDI, debugWIRE, aWire, TPI or SPI target interfaces. It is using JTAG or SWD target interfaces for the ARM Cortex-M based SAM microcontrollers. Extra features of the Power Debugger are two independent current sensing channels for measuring and optimising the power consumption. A CDC virtual COM port and Data Gateway channels are included for streaming data to the host computer from a SPI, USART, TWI or GPIO source. The Power Debugger is a CMSIS-DAP compatible debugger that streams power measurements and application debugging data to Data Visualiser for real-time analysis. Supports UPDI, JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces Voltage and Current simultaneous measurements on two independent channels USB feed-through connection for easy measurement of current consumption of USB powered target board USB powered Adjustable 1.62 V to 5.5 V power supply operation ARM Cortex Debug Connector (10-pin) pin-out AVR JTAG connector pin-out CDC virtual COM port interface. Power Debugger Kit Contents. Main unit with plastic back plate USB cables (2) Squid cable 10-lead Flat cable (10-pin 50 mil connector and 6-pin 100 mil connector) Adapter board (20-pin 100 mil connector, 6-pin 50 mil connector and 10-pin 100 mil connector) Jumper cable 20-pin 100 mil