Microchip Xplained Pro Radio Transceiver Extension Board ATREB233-XPRO / 1306156

AT86RF233 Amplified Extension board: ; 800-7585 800-7585 AT86RF233 chip: ; 769-2687 769-2687. ZigBit 2.4GHz AT86RF233 Extension Board. The Atmel ZigBit™ extension board ATREB233-XPRO supports the AT86RF233 wireless transceiver chip. It is used to evaluate the chip and can operate plugged into an Xplained Pro board or wired into a developer's prototype system. The ZigBit module is compatible with a ZigBee stack that supports a self-healing, self-organizing mesh network, while optimizing network traffic and minimizing power consumption. AT86RF233 2.4GHz ISM-Band Transceiver RF Output Power: +3.6dBm Receiver sensitivity: -96dBm Modulation: O-QPSK 16 channels @ 5MHz OTA data rate: 250kbps (IEEE 802.15.4) AES-128 encryption Pre-loaded with Atmel assigned 64-bit MAC address in EEPROM 128byte FIFO Tx/Rx buffer Host communication: serial SPI Xplained Pro 20-pin connector Header for monitoring ZigBit current PCB Trace antenna MS-147 RF test connector Power supply: +2.0 to +3.6Vdc Dimensions: 25 x 20 x 3.2mm Applications: Industrial Control, Residential and commercial automation, Health care, Consumer electronics, PC peripherals and local communication for the Internet of Things (IoT)