RS PRO Hand Ratcheting Crimp Tool for Insulated Spade Connectors, 0,5 → 6mm² Wire / 1251964

RS PRO Crimping Tool for Insulated Terminals. RS PRO hand crimping tool for crimping insulated terminals onto wire. This ratchet hand tool has 3 crimping cavities; 1.25mm ;sup>2 ;/sup> (22-16 AWG), 2mm ;sup>2 ;/sup> (16-14 AWG) and 5.5mm ;sup>2 ;/sup>(12-10 AWG). This RS Pro crimp tool has been designed for professional use with the highest attention to details. Features and Benefits: Overall height 10.5 inch Handle length: 7 inch Compact and lightweight tool for professional use Material: hardened steel frame with plastic grips Ratchet release Wire size range: 0.5 to 6.0 mm² Typical Applications Crimping tools can be used for a variety of applications:- Maintenance ; repair Electrical Installations Cable assemblies FAQ ‘s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How to maintain the product? To maintain a good function and long life: Axles and other movable parts should be regularly lubricated Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to dirt or other contaminants *Use a light mineral-free oil The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage. Crimp Nest. 22 - 16 AWG 1.25 mm². 16 - 14 AWG 2mm². 12 - 10 AWG 5.5 mm². Why RS PRO?. RS PRO is the own brand of RS. The RS PRO Seal of Approval is your assurance of professional quality, a guarantee that every part is rigorously tested, inspected, and audited against demanding standards. Making RS PRO the Smart Choice for our customers.