Terminal Cover. Requires a separator end section every 40cm approx and at DIN rail extremities. A 6mm dia hole is required in the cover at each separator. Transparent PVC protective cover, 1m lengt...
UL, CSA. End covers (Stock Numbers ; 384-7054 384-7054 , ; 384-7060 384-7060 and ; 384-7076 384-7076 ) are required for the 6, 10 and 18mm ;sup>2 ;/sup> High Current Terminals (Stock Numbers ; 384-...
Nuts and washers. Stud Terminals. Low voltage drop Securely mounts on Top hat rail with internal spring foot Partitions fit between terminals and can be broken down by hand to suit Yellow safety co...
UL, CSA. End covers (Stock Numbers ; 384-7054 384-7054 , ; 384-7060 384-7060 and ; 384-7076 384-7076 ) are required for the 6, 10 and 18mm ;sup>2 ;/sup> High Current Terminals (Stock Numbers ; 384-...
RS PRO Fused Terminals. RS PRO range of DIN rail terminal blocks. DIN Rail terminal blocks are used to protect electrical systems against overcurrent and short-circuiting. They clip on to a DIN rai...
Isolating terminals must only be used for isolating sections of a circuit for test purposes, they must never be used to switch devices on or off when power is applied. Micro Fuse Terminals. Suited ...
UL, CSA. End covers (Stock Numbers ; 384-7054 384-7054 , ; 384-7060 384-7060 and ; 384-7076 384-7076 ) are required for the 6, 10 and 18mm ;sup>2 ;/sup> High Current Terminals (Stock Numbers ; 384-...
UL, CSA. Double-Deck. These double-level terminal blocks are ideal for use in applications requiring high density wiring. Interconnection / shorting is possible at both levels. It is suited for 800...