Terminal block  (516 offers of 5,364,098 product items)

Isolating terminals must only be used for isolating sections of a circuit for test purposes, they must never be used to switch devices on or off when power is applied. UL recognised, CSA certified....

ABB 1SNK900107R0000

Mini Spring Blocks. Jumper bar can be fitted without loss of cable entry space Available in 2 or 4 spring versions Mounts on TS15 rail Terminals have a current rating of 15A to 24A Jumper bars are ...

High Current Double Stud Terminals and Shrouds. A set of 4 spacers is available and should be fitted between each terminal to provide additional isolation. A translucent cover which snaps onto the ...

High Current Double Stud Terminals and Shrouds. A set of 4 spacers is available and should be fitted between each terminal to provide additional isolation. A translucent cover which snaps onto the ...

Earthing End Stop. May be fitted on rail to hold blocks in position, and also provide a method of earthing the rail.

Mini Spring Blocks. Jumper bar can be fitted without loss of cable entry space Available in 2 or 4 spring versions Mounts on TS15 rail Terminals have a current rating of 15A to 24A Jumper bars are ...

Spring Loaded Terminal (Feedthrough and Test). Screw compression clamp terminals incorporating a spring under each wire clamp, giving high vibration resistance and also meets requirements of ESI 50...

ABB 1SNK900106R0000

ZK2.5 PI-Spring Feed-Through Terminal Blocks. ZK2.5 PI-Spring feed-through Terminal Blocks combine high performance with compact dimensions. The terminals are also the best for marking, with an up-...

Accessory Type = Jumper Bar Series = BJMI For Use With = DIN Rail Terminal Blocks

High Current Double Stud Terminals and Shrouds. A set of 4 spacers is available and should be fitted between each terminal to provide additional isolation. A translucent cover which snaps onto the ...

These terminals are only rated to 300V and 10A (UL). Sensor/Actuator Connection Terminals. Terminals with four conductor entry points Two of the entry points have hard linked sensor/actuator points...

The yellow terminals must not be considered to be 'direct earth' terminals as they do not have an integral connection to the rail. Standard Terminal Blocks. These screwless spring cage clamp termin...

High Current Double Stud Terminals and Shrouds. A set of 4 spacers is available and should be fitted between each terminal to provide additional isolation. A translucent cover which snaps onto the ...