| | | | |
Picture | | | | Order |
|
|
|
|
|
from £ 22.681* per piece |
|
|
|
|
from £ 41.095* per piece |
|
|
|
|
£ 12.019* per piece |
|
|
|
|
from £ 41.105* per piece |
|
|
|
|
from £ 41.095* per piece |
|
|
|
|
from £ 41.095* per piece |
|
|
|
|
from £ 41.095* per piece |
|
|
|
|
from £ 41.095* per piece |
|
|
1008x1 Taper Bush - Imperial Bore (1 offer) 1008x1-DUN Taper Bush manufactured by Dunlop can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 1inches this Taper Bush offers no costly reboring: full range... |
|
from £ 2.37* per box |
|
|
1008x1/2 Taper Bush - Imperial Bore (1 offer) 1008x1/2-DUN Taper Bush manufactured by Dunlop can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 0.5inches this Taper Bush offers no costly reboring: full r... |
|
from £ 2.58* per box |
|
|
1008x10 Taper Bush - Metric Bore (1 offer) 1008x10-DUN Taper Bush manufactured by Dunlop can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 10mm this Taper Bush offers no costly reboring: full range o... |
|
from £ 2.37* per box |
|
|
1008x11 Taper Bush - Metric Bore (1 offer) 1008x11-DUN Taper Bush manufactured by Dunlop can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 11mm this Taper Bush offers versatility and reduced fitting ... |
|
from £ 2.37* per box |
|
|
1008x11/16 Taper Bush - Imperial Bore (1 offer) 1008x11/16-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 0.688inches this Taper Bush offers versatility and r... |
|
from £ 2.61* per box |
|
|
1008x12 Taper Bush - Metric Bore (1 offer) 1008x12-DUN Taper Bush manufactured by Dunlop can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 12mm this Taper Bush offers no costly reboring: full range o... |
|
from £ 2.37* per box |
|
|
1008x13/16 Taper Bush - Imperial Bore (1 offer) 1008x13/16-CHALL Taper Bush manufactured by Challenge can be used as a shaft fixing on all types of industrial equipment. With a nominal bore of 0.8125inches this Taper Bush offers versatility and ... |
|
from £ 2.61* per box |
|
|