 | | | | | |
| Picture | | | | Order |
|
98% |
|
Rapid Economy Retort Stand, 225 x 150mm (1 offer) This economical retort stand has a 225 x 150mm base made from enamel finished steel. The 12mm plated-steel rod screws into the base and can therefore be removed for easier storage. |
|
from £ 9.79*
per piece |
|
98% |
|
Rapid Economy Retort Stand, 200 x 125mm (1 offer) This economical retort stand has a 200 x 125mm base made from enamel finished steel. The 12mm plated-steel rod screws into the base and can therefore be removed for easier storage. |
|
from £ 7.6735*
per piece |
|
96% |
|
Eisco MTST5 Laboratory Retort Stand Set (1 offer) This laboratory retort stand set from Eisco is made from high quality materials for a long service life and is an essential piece equipment for all science labs in schools, factories and research u... |
|
from £ 12.78*
per piece |
|
95% |
|
Eisco Retort Stand Ring 150mm (1 offer) A supporting ring with an inside diameter of 150mm for use with a retort stand. The ring uses a separate boss-head clamp (not included) that allows the distance of the ring from the stand rod to be... |
|
from £ 2.58*
per piece |
|
95% |
|
Eisco Retort Stand Ring 75mm (1 offer) A supporting ring with an inside diameter of 75mm for use with a retort stand.The ring has a built-in boss-head clamp for attachment to the support rod of the stand. |
|
from £ 3.67*
per piece |
|
95% |
|
Eisco Retort Stand Ring 50mm (1 offer) A supporting ring with an inside diameter of 50mm for use with a retort stand.The ring has a built-in boss-head clamp for attachment to the support rod of the stand. |
|
from £ 2.59*
per piece |
|
95% |
|
Eisco Bosshead Economy Pack of 10 (1 offer) Economical die-cast alloy boss-heads for use with laboratory stands, capable of holding support rods up to 16mm in diameter. |
|
from £ 11.40*
per piece |
|
95% |
|
|
|
from £ 2.9765*
per piece |
|
95% |
|
|
|
from £ 9.728*
per piece |
|
94% |
|
|
|
from £ 8.44*
per piece |
|
94% |
|
|
|
from £ 14.88*
per piece |
|
92% |
|
Eisco Laboratory Jack 150 x 150mm (1 offer) A high quality laboratory jack, ideal for accurate positioning of laboratory equipment, especially where adjustment is required.The jack has a 10mm tapped hole in the right rear corner for acceptin... |
|
from £ 39.781*
per piece |
|
91% |
|
|
|
from £ 55.11*
per piece |
|
90% |
|
|
|
from £ 3.349*
per piece |
|
