segger  (95 offers of 5,364,164 product items)

Features Extremely Portable, Production Grade, Flash Programmer Used for In-Field Firmware Updates Product Range - IC Product Type Programmer Silicon Family Name RL78, RX Core Architecture ARM, Pow...

The SEGGER J-Link RX FINE Adapter converts the 20-pin, 0.1 inch standard connector to a 14-pin, 0.1 inch RX FINE connector. Includes the necessary cable.Package includes: .1″ 14-pin ribbon cable (1...

The SEGGER Flasher PRO is a programming tool for Microcontroller with on-chip or external Flash memory.Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC ...

The SEGGER J-Link TI-CTI-20 Adapter has been designed to connect from the standard J-Link/J-Trace/Flasher 20-pin 0.1″ target connector to TI CTI-20 connector.Adapter permits the connection of the J...

Product Range - Silicon Manufacturer NXP Application Sub Type RTOS For Embedded Systems Kit Contents Eval Board MK66FN2M0VMD18 Kit Application Type Programming / Debugging SVHC No SVHC (14-Jun-2023...

The SEGGER J-Link Mictor 38 Adapter connects the standard 20-pin 0.1″ J-Link interface to the 38-pin Mictor interface. The pinout follows the single target connector pinout specification as defined...

Features Card Detect Signal, Write Protect Signal, SPI and Card Mode, Ground and Signal Headers For Use With NAND-Flash Eval Board Product Range - Accessory Type SD Card Adapter SVHC No SVHC (14-Ju...

The SEGGER J-Link Signal Smoothing Adapter can be inserted between the J-Link debug probe and the debug target to overcome signal integrity issues. Depending on target load capacitance, signals mig...

Features Designed to Enable the Quick Set up of a Ref Project When Making Use of a J-Link/J-Trace Unit For Use With Evaluation Boards Product Range - Accessory Type Trace Reference Board SVHC No SV...

The SEGGER Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the 10-pin 100-mil Intel FPGA JTAG connector providing debug access to FPGA based MCU cores like the dual-core ARM Cortex-...

The SEGGER J-Link 2mm Adapter converts the 20-pin, 0.1 inch pitch standard J-Link connector to a 20-pin, 2mm pitch connector.The J-Link 2mm Adapter is a 1:1 adapter

Features J-Link Adapter Designed to Connect J-Link to PCB, 10 pin JTAG to 10 Pin Needle Connector For Use With J-Link / Flasher to PCB's Product Range - Accessory Type Needle Adapter SVHC No SVHC (...

The SEGGER J-Link Measurement+Patch Adapter provides test points for all debug signals to allow easy access for test probes. It has a standard 20-pin 0.1″ socket towards the J-Link debug probe and ...

The SEGGER J-Link SiLabs C2 Adapter converts the 20-pin, 0.1 inch pitch standard J-Link connector to a 10-pin, 0.1 inch pitch SiLabs C2 connector.Includes 10 pin ribbon cable

The SEGGER J-Link 6-pin Needle Adapter has been designed to connect J-Link to a PCB which does not come with a mating connector or programming header.No additional connector required on your PCB Ve...