seeed studio  (524 offers of 6,202,140 product items)

The Grove Temperature & Humidity Sensor from Seeed Studio is factory calibrated to ensure it functions well in your project.With and accuracy of ±2°C and ±5%RH this sensor is an easy choice for mos...

From the Grove modular connector prototyping system is the Grove - Temperature Sensor. The sensor uses an onboard thermistor to measure ambient temperature over an operating range of -40 to 125°C, ...

The Grove Barometer sensor is a low cost, high-precision environmental sensor that is based on the new BMP280 sensor, an upgraded version of the BMP180. The sensor can carry out precise measurement...

The Grove Smart Plant Care kit from Seeed Studio takes plant care to a whole new level by combining Grove modules with your Arduino or OrangePip. There's a set of sensors to monitor the plant's env...

From the Grove modular connector prototyping system is the Grove - Button . The momentary push button outputs a HIGH when pressed and a LOW when released.

The Grove Ultrasonic Range Finder from Seeed Studio emits ultrasonic pulses and times the return signal to establish the distance between the sensor and a reflective object. It can measure distance...

The Grove Temperature & Humidity Sensor from Seeed Studio is factory calibrated to ensure it functions well in your project. With and accuracy of 0.3°C and 2%rh this sensor is an easy choice for mo...

The Grove Thumb Joystick from Seeed Studio has two analogue outputs, one each for X and Y. The stick also has a push button, when it is pressed the analogue lines are set to maximum, otherwise they...

The Grove Digital Light Sensor from Seeed Studio gives you three detection modes, infra-red only, visible light only , and the two combined. The sensor returns a 16-bit value for the light intensit...

The Grove Touch Sensor module is an ideal alternative for a mechanical pushbutton. The simple device uses the TTP223-B touch detector IC to measures the capacitance of a metallic pad. When a finger...

The Grove Infrared Temperature Sensor from Seeed Studio is a very low-power device for non-contact measurement of temperature.

From the Grove modular connector prototyping system is the Grove - Light Sensor v1.2. This updated version gives higher reliability and sensitivity. The sensor is designed to measure light levels a...

The BeagleBone Green from Seeed Studio features two Grove connectors to take advantage of Seeed's extensive collection of add-on boards. This new board is just like the BeagleBone Black except the ...

The ReSpeaker Core Voice Interface is an open modular voice interface for your surroundings. The interface lets you interact with your home appliances, plant, office equipment, IoT devices or anyth...

The Arduino Grove Base Shield from Seeed Studio is switchable between 5V and 3.3V making it compatible with the official and a wide range of unofficial Arduinos. This board is the hub for a whole s...